Marport Scala2, User Manual

Page: 115 / 177

Scala2 | Version 5 | Display Configuration
Display Options
You can change the display of the MultiTrawl using customization panels. Right-click the view to
open them.
Controls
• Trawl Setup : select Auto to automatically detect the number of
trawls or select manually the type of trawl gear in use. If you
change the trawl gear, change this setting accordingly.
• Door Spread :
• Current value : current total spread distance.
• Nominal value : total spread distance you want to have. If the
value of the current distance becomes larger or smaller than
the nominal value, the alignment axis appears in red.
• Tolerance : tolerance threshold between the current and
nominal values.
• Reset nominal : if the current spread distance is correct, click to
make this distance the nominal value.
• Track History : zoom in and out of the time scale of the trawl
tracks.
Important: To have correct door spread values displayed on Scala2, you need to be careful
when you reduce the number of trawls.See Changing the Number of Trawls on page 124.
| 114