Marport M6 Mx, Service Manual

Page: 73 / 79

M6 - Mx computer System | V2 | Appendix
Appendix
Frequency Plan
It is important to carefully plan the setup of your sensors before adding them to the system. You
can create a table with a list of frequencies and complete it when you add sensors.
Boat & Channel Codes
This list shows the standard frequencies for PRP telegrams. When you configure boat codes, make
sure to respect the correct interval between frequencies (see table above).
Codes
BC/CH Frequency FID (Scanmar)
C-1/CH1 42833 45
C-1/CH2 41548 32
C-1/CH3 41852 35
C-1/CH4 40810 25
C-1/CH5 42500 42
C-1/CH6 43200 49
C-2/CH1 42631 43
C-2/CH2 41417 31
C-2/CH3 41690 33
C-2/CH4 40886 26
C-2/CH5 42300 40
C-2/CH6 43100 48
C-3/CH1 42429 41
C-3/CH2 41285 30
C-3/CH3 41548 32
C-3/CH4 40970 27
C-3/CH5 42100 38
C-3/CH6 43000 47
C-4/CH1 42226 39
C-4/CH2 41852 35
C-4/CH3 41417 31
C-4/CH4 41160 29
| 72