MARMON ANGELO PO COMBISTAR FX, Technical Manual

Page: 113 / 178

Copyright by Servizio Clienti ANGELO PO Spa
113
4.11. Periodic gas flue analysis
For gas ovens only it is required to check the combustion once at year. On the expiry of
one year from the last "setup GAS" every time the oven will be switched on, a warning
"CAUTION! Call for service for checking gas (CO2 and CO)” will appear on the display. To
remove the warning it is necessary to make the gas flue analysis and perform the Setup
Gas.
When you will see this warning on the display you can erase it temporarily by pressing
button RESET, and you can work normally with the oven until next switching on.
To remove the warning for longer time you must perform Setup Gas and make gas flue
analysis.
For gas ovens level 1, 2 and BX the message
“Att” “Ctr” “GAS”
(Attention Gas Control
required) will appear after 2500 working hours. Also in this case you can erase it
temporarily by pressing button RESET, and you can work normally with the oven until next
switching on. To remove the warning for longer time you must perform Setup Gas and
make gas flue analysis.