MARMON ANGELO PO ACT.O, Technical Manual

Page: 74 / 184

Copyright by Servizio Clienti ANGELO PO Spa
74
5.2. System components
The following diagram shows the system components.
Important:
- always check before every intervention that all components are securely fixed
(electrical connectors, screws, clamps, fittings, insulating material)
- make sure that the air inlet filter (9) and the fitting on the foot-holder of the valve
pressure socket pipe (6) are completely clean (if necessary, use a toothpick or rag
to remove built-up dirt).
-
The gas inside the pipe (7) and the fitting (3) is in depression, if there is a leak, do
not look for it with open flames as it could be drawn into the mixer and cause
fire/explosion.