MARMON ANGELO PO ACT.O, Technical Manual

Page: 138 / 184

Copyright by Servizio Clienti ANGELO PO Spa
138
6.10. User settings related to washings
The times related to these two alarms can be set by the user by accessing “
Settings
”,
“
User Parameters
”, typing the password “
APGC
” and entering the following screen:
Oven Cleaning Time Limit : this is the maximum oven block time. Range: OFF
—256 hours. If
different from “OFF”, at the end of this time the oven blocks.
Oven Cleaning Advance Notice Time : this is the time left until the oven blocks from
which the oven cleaning notice is given. Range: 1
—256.
Decalcification Notice Time : it is the time after which the notice to check the amount of
limescale in the oven cooking chamber appears. Range: OFF
—256 hours.
Release cooking : not active. Unblocks the manual cooking of the oven without having to
perform a wash if the “oven cleaning time limit” has expired.
If the yellow warning screen appears, “
W01
” appears in the list of alarms.
Whereas, in case of oven block, the “
CLE
” alarm is recorded