MARMON ANGELO PO ACT.O, Technical Manual

Page: 40 / 184

Copyright by Servizio Clienti ANGELO PO Spa
40
Oven Type : From this window select the type of oven in question. The selection of the
type of oven is made whenever a board (Power, CPU, Display, Inverter, Combustion
Control Board) is replaced , so as to realign all parameters related to that oven.
The oven selection automatically starts the configuration procedure during which the
peripherals present are checked. A list of the found peripherals is shown at the end of the
configuration: check that the found peripherals coincide with those installed . If the
peripherals do not match, check the oven again and repeat the configuration phase.
The following table shows the types of ovens that can be configured.
Tab.1
Oven type
Inverter
101
Inverter
102
Ctrl. comb.
21
Ctrl. comb.
22
Display
AT61E - EW x x
AT82E x x
AT101E - EW x x
AT122E x x
AT201E x x x
AT202E x x x
AT61G - GW x x x
AT82G x x x
AT101G - GW x x x
AT122G x x x
AT201G x x x x x
AT202G x x x x x