BEFORE USE
1. Choose unit installation location carefully. Avoid placing it in direct sunlight or
close to a source of heat. Also avoid locations subject to vibrations and excessive
dust, cold or moisture. Keep away from sources that hum, such as transformers
or motors.
2. Do not open the cabinet as this may result in damage to the circuitry or electrical
shock. If a foreign object should get into the set, contact Customer Service.
3. Be sure not to handle record with dirty fingers. Never play a record that has a
crack on the surface.
4. When removing the power plug from the wall outlet, always pull directly on the
plug, never pull the cord.
5. To protect the stylus, don’t forget to put on the white protective needle cover
after use.
6. Do not attempt to clean the unit with chemical solvents as this might damage the
finish. Use a clean, dry cloth.
7. In order to shut off the power to this product completely, unplug the power cord
from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an
extended period of time, such as a vacation.
8. Keep this manual in a safe place for future reference.
ASSEMBLY
1. Take all the components from the package and then place the product on a
stable surface.
2. Surround the belt on the bottom of metal platter. Make sure the belt is not
installed twisted. Use your thumb to stretch the belt as the illustration below.
3. Reverse the platter and don’t forget to keep holding the belt. Then match the
spindle and insert the platter to the unit.
4. Surround the belt which is held with your thumb into the main (white) rotation
column of the triangular arrangement gear columns.
5. Place the turntable mat on the platter. Then the main assembly is accomplished.
NOTE:
To disassemble the turntable, directly grasp the turntable and pull it upward
6. Remove the counterweight and place it in it’s proper location on the Tone arm
(refer to illustration)
7. Remove the 45rpm adapter and place it in it’s new home located in the top right
corner of the record player.
EN
