background image

LIMITED WARRANTY

All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of

installation, except heating elements which are warranted against defects in workmanship and materials for five years from date of installation. This

warranty does not apply to damage from accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate volt-

age; nor to equipment improperly installed or wired or maintained in violation of the productʼs installation instructions. All claims for warranty work must

be accompanied by proof of the date of installation.

The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred

to return products to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the

nearest Marley authorized service center or the Marley Engineered Products Center, and we will repair or replace, at our option, at no charge to you

with return freight paid by Marley. It is agreed that such repair or replacement is the exclusive remedy available from Marley Engineered Products.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED. AND ALL IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY

DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL

DAMAGES ARISING WITH RESPECT TO THE PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.

Some states do allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise

returned to the factory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products.

When requesting return authorization, include all catalog numbers shown on the products.

04/10

Part No. 5200-2267-007

ECR 38696

HOW TO OBTAIN WARRANTY SERVICE AND

WARRANTY PARTS PLUS GENERAL INFORMATION

1. Warranty Service or Parts

1-800-642-4328

2. Purchase Replacement Parts

1-800-654-3545

3. General Product Information

www.marleymep.com

Note:

When obtaining service always have the following:

1. Model number of the product

2. Date of manufacture

3. Part number or description

Replacement Parts

Key

No.

Description

Part Number

1

Front Cover

1402-2239-000

2

Motor: 208V

3900-2010-000

240V

3900-2010-000

120V

3900-2010-003

3

Manual Limit

4520-2013-000

4

Fan Delay

410074000

5

Thermostat

5813-2027-000

6

Element: 208V/2000W 302015001

240V/2000W 302015002
277V/2000W 302015003
277V/3000W 302012006
208V/4000W 302012007
240V/4000W 302012008
240V/3000W 302012009
240V/4800W 302012010
277V/4800W 302012011

120V/1500W 302012827

7

Fan Blade

490030103

8

Parts Bag

1205-2070-001

470 Beauty Spot Rd. East

Bennettsville, SC 29512 USA

Summary of Contents for K404A






Reviews: