background image

3

Read this document before

installing the appliance

Warning

Incorrect installation, adjustment, alteration, repair or maintenance work may lead to material 

damage or injury. All work must be carried out by certified, qualified professionals. If the 
appliance is not positioned in accordance with the instructions, the warranty shall be rendered 
void. This appliance is not intended for use by children or persons with a physical, sensory or 
mental handicap, or who lack the required experience or expertise, unless they are supervised 
or have been instructed in the use of the appliance by somebody who is responsible for their 
safety. Children must be supervised to ensure that they do not play with the appliance.

Index

1  

Intended use 

 

4

2  

Safety 

5

3  

Receiving of the goods 

 6

 

3.1  

Damage in transport 

 6

 

3.2  

Transport packaging  

6

4  

Mounting  

6

 

4.1  

Ceiling mounting 

6

 

4.2  

Mounting suction accessories 

7

 

4.3  

Roof mounting 

7

 

4.4  

Louvre adjustment 

7

 

4.5  

Connection cables 

8

 

4.6  

Air valve and drain valve 

9

5  

Electrical connection 

9

6  

Switchgear  

10

7  

Commissioning  

13

8  

Cooling 

15

 

8.1 

Air heater for heating and cooling 

15

 

8.2 

Specifications condensate pump 

15

 

8.3 

Electrical connection condensate pump 

16

 

8.4 

Mounting 

16

 

8.5 

Commissioning 

16

 

8.6 

Maintenance 

16

9  

Maintenance  

16

 

9.1 Warranty 

16

 

9.2 Motor 

17

 

9.3 

Heat exchanger 

17

 

9.4 

Air filter 

17

10  

Decommissioning - Disassembly 

17

 

10.1 

Decommissioning 

18

 

10.2 

Disassembly Tanner FBA 

18

 

10.3 

Disassembly Tanner FBA Ultra 

18

 

10.4 

Disassembly Tanner FBA-K Ultra 

19

 

10.5 

Removal and destruction 

19

 EN

Summary of Contents for 0662551





















Reviews: