Marine Tech Seacraft ENC II, Quick User Manual

Page: 38 / 52

38
19. Other settings
Miscellaneous other settings are available as a separate screen:
Backlight – [1,2,3,4,5,auto] – Changes the display backlight intensity. Value 1 means the constant lowest brightness
(about 20%), value 5 means the constant maximum brightness, value ‘auto’ means that the backlight will be auto
adjusted using the ambient light sensor.
Record every [2s,5s,10s,30s] – This is the maximum available time space between two records in memory. Note, that in
some cases two records may be collected faster than this value, but never longer.
Depth threshold [0.5m, 1m, 1.6m] – The navigation console will count ‘underwater time’, when the depth is equal or
greater than this value.
Auto-ON [yes/no] – If yes, device will switch on automatically when immersed in water by at least 0.3 meters (1 ft.).
Auto-OFF [yes/no] – If yes, the device will automatically power-off, if the water depth is at least 0.5 meters, RECORDING
is OFF (HOLD state), and the user did not press any button during the last 5 minutes.