28
10.
Swim route graph
This screen presents the changes in the diver location projected on a flat surface (like on a map). The route start point is
always positioned in the screen center. The route end point will be shown as a green dot, but only on the present route.
Near the right edge of the screen, you will find some information elements:
1 -
Top button role (now – go to next screen: return to main menu)
2 -
Time of first recorded data (hh:mm, 24-hour system)
3 -
Date of first recorded data (DD.MM / YYYY)
4 -
Total recording time, in minutes (above 2h, this value will be shown in hours), may be blank, if the value cannot
be calculated (empty record)
5 -
Total distance in meters (above 2000m in kilometers), may be blank, if the value cannot be calculated (empty
record)
6 -
Route number in memory (blue) and lower button role (now – go to the next route number)
Note:
You may tilt the device to the left or to the right, in order to change the button roles on this screen. When tilted
left, the lower button brings you to previous route number. When tilted right, the lower button will allow you to delete
the current route. When tilted left, the upper button brings you to the previous graph (depth profile).
Summary of Contents for Seacraft ENC II
Page 1: ...1 ...
Page 11: ...11 5 Main screen layout After power on the device display will show this content ...
Page 50: ...50 ...
Page 51: ...51 ...
