20
7.
Destination parameters – setting and changing
When you activate the DESTIN(ation) option on the additional information screen (see fig. 1 on p. 6), the device will
show the current destination parameters (if set) or it will suggest new ones, as shown in the following picture:
1 -
Current route number in memory / total routes in memory
2 -
Azimuth – planned course (including deviation)
3 -
Distance – The distance to the planned destination
4 -
Operation hint – When you press the lower button, AZIMUTH can be modified.
Summary of Contents for Seacraft ENC II
Page 1: ...1 ...
Page 11: ...11 5 Main screen layout After power on the device display will show this content ...
Page 50: ...50 ...
Page 51: ...51 ...
