manualshive.com logo in svg

Marine PC MPC-AWM3V, User Manual, Page: 13 / 20

Share
Download
Marine PC MPC-AWM3V User Manual Download Page 13

 

UM-MPC-AWM3V(A)  10/2011

13

DC Power Connector

•  The IP67 sealed DC Power Cable, 3 m (10 ft), is in the accessory box
•  Plug in the quick-connect 3-pin connector by lining up the orientation pins, push in and twist 

CW until it snaps in place.

•  To disconnect, twist the  outside ring CCW and pull on the connector away from the unit until 

the cable is free

•  There are two flying leads: negative: black (-) and positive: white, labeled with (+)
•  Connect the flying leads to the corresponding polarity on the DC voltage source

Optional AC Power Connector

•  The optional AC Power Adapter Cable Set consists of a 3 m (10 ft) cable, the power adapter 

and a 1.8 m (6 ft) cable

•  The cable accepts voltage from 110 to 250 VAC and frequency from 47 to 63Hz
•  The AC power plug is standard for 120 VAC/60Hz, common in North America, and
•  Follow procedure above to for connection to the unit.

caution!

Confirm the DC  

connections are made to the 

correct polarity.

caution!

When connecting or discon-

necting, never pull on the ca-

ble, only hold the connector..

Summary of Contents for MPC-AWM3V





















Reviews:

No comments