MARINE DATA F069036, User Manual, Page: 16 / 29

MD69BRX
16
10 COMMISSIONING THE PRODUCT
Ensure that the installation complies with section 9 INSTALLATION.
Apply system power (24 V dc) to the MD69BR.
The MD69BR will initially align to zero degrees; it will then adopt the heading which is being
transmitted from the heading source.
Verify that the MD69BR follows the heading source when altering the vessel’s heading.
If an error condition arises, refer to section 11.5 Loss of Data Indication .
Ensure that the background display lighting is set to a suitable level using the integral rotary
dimmer control or a remote dimmer if connected.
Be sure to fill out the product registration form and return it to Marine Data. This activates the
warranty.
10.1 Product Registration
Be sure to register your product online at www.marine-data.co.uk.
You will need:
•
Product Type (e.g. MD69BRX)
•
Product Serial No.
•
Vessel on which the product is installed
•
Installation Date
•
Installer / Customer representative contact details
It would also be helpful to list other manufacturer’s equipment to which the product is connected
(e.g. Gyro, Radar, other Repeaters etc).
Alternatively, fill out a product registration form and return it to Marine Data.
NOTE: It is the process of registration which activates the warranty.