Revision 1.7.2
Page 45
Meters/Second
Inches/Second
Feet/Second
km/Hour
miles/hour
knots
5.2.7.20
Motion Acceleration
This menu item allows you to select the units to be used for the display of acceleration. Units that
may be selected include the following:
Meters/Second
2
G
Feet/Second
2
5.2.7.21
Angular Velocity
This menu item allows you to select the units to be used for the display of angular velocity. Units that
may be selected include the following:
Degrees/Second
Degrees/Minute
Radians/Second
Radians/Minute
RPM
5.2.7.22
Angular Acceleration
This menu item allows you to select the units to be used for the display of angular acceleration. Units
that may be selected include the following:
Degrees/Second
2
Degrees/Minute
2
Radians/Second
2
5.3 Control Mode
Control mode may be entered from the favorite screens mode of the display to perform certain control
and reset functions. The following functions may be performed in control mode:
Switch/Breaker
– may be switched on and off (see section 7.25 for details)
Anchor Watch
– Anchor Drop position may be set to the current GPS position (see section
7.1 for details)
Engine Trip Fuel Used
– may be reset to zero for fuel flow transducers that are capable of
being reset via the 126208 NMEA 2000
®
command message, such as the Maretron FFM100
Trip Volume
– may be reset to zero for fluid flow transducers that are capable of being reset
via the 126208 NMEA 2000
®
command message, such as the Maretron FFM100
