Installation manual - Eletta
®
- 31
FAMILY PRODUCT
DESCRIPTION
DIFFERENCES FROM STANDARD
MOTOR CONTROL UNIT 2
This model provides all the functionalities of
the standard model, with the exception of the
tarp partially moving backwards function
provided for tail lift tipper bodies.
In this version the 4P1.00293 TIMING
CIRCUIT
FOR
TARP
MOVING
BACKWARDS has been removed.
The removal of this component does not
change the functional structure of the motor
control
unit
and
the
electromagnetic
compatibility then.
MOTOR CONTROL UNIT 3
The difference between this motor control unit
and the standard model is that the remote
control has 4 channels instead of the standard
two.
The first two channels are devoted to the
motor command (as the standard one), while
the following 2 are used as auxiliary controls
on the truck (with the verification of the
electromagnetic compatibility carried out by
the car manufacturer).
In this version the
4P3.00101 (2 CHANNEL
MINI TRANSMITTER) has been changed in
the
4P3.00393
(4
CHANNEL
MINI
TRANSMITTER).
3.10.2 Installation of the electrical components
Hereafter the required operations for installing the electrical components:
•
Using proper hooking elements, fasten the Motor Control Unit on the chassis of the tipper body.
•
Fasten one of the two contact plates on the front part of the tipper body.
•
Fasten the other contact plate on the chassis.
IMPORTANT!
The fastening of the contact plates has to be done making sure that, with the tipper body completely
lowered, both contact plates meet properly.
WARNING!
Make sure that the contacts connect properly to avoid any damage to the wiring system due to a
possible short circuit
EXAMPLE OF ASSEMBLY
The Motor Control Unit can be positioned anywhere on the tipper-trailer chassis, provided that it is fastened vertically (as
shown in above figure).
IMPORTANT!
The Motor Control Unit has to be fastened vertically on the tipper trailer chassis (see figure) by means of
the supplied connection cables.
For battery connection insert a 70A fuse (not supplied) -
see “wiring diagram” in paragraph
Call us in case of any doubts or problems during installation.
Note:
Any installation made without authorization by Marcolin Covering s.r.l.
can invalidate the warranty
!
