DISABLE / ENABLE RCC RECEPTION
Press and hold the
RCC
button for eight (8) seconds to disable
RCC reception.
Press and hold the
RCC
button for eight (8) seconds to enable
automatic RCC reception.
SETTING THE TIME AND CALENDAR
1. In time display mode, press and hold the
TIME SET
button for
two (2) seconds to enter Time/Calendar setting mode.
2. Press the
+
and
-
buttons to adjust each setting.
3. Press the
TIME SET
button to confirm each setting and
advance to the next one.
4. The setting sequence is as follows:
12/24-hour format
>
Time Zone
>
Hour
>
Minute
>
Second
>
Year
>
Month
>
Day
>
+/- 23-hour offset
>
Language
>
DST auto/off
5. The language selection sequence is as follows:
EN
(English) >
FR
(French) >
DE
(German) >
ES
(Spanish) >
IT
(Italian) >
NL
(Dutch) >
RU
(Russian)
6. Press the
TIME SET
button to exit Time/Calendar setting
mode. The clock will automatically exit after one (1) minute if
no buttons are pressed.
NOTE:
When setting the seconds value, press the
+ and - buttons
simultaneously to set the value to zero (00).
SETTING THE ALARM TIME
• In time display mode, press and hold the
ALARM SET
button
for two (2) seconds to enter Alarm Time setting mode. The
hour digits will flash.
• Press the
+
and
-
buttons to adjust the alarm time hour value.
• Press the
ALARM SET
button again and use the
+
and
-
buttons to adjust the alarm time minute value.
• Press the
ALARM SET
button once again to save the
alarm time and exit Alarm Time setting mode. The clock
will automatically exit after one (1) minute if no buttons
are pressed.
NOTE:
Adjusting the alarm time will automatically enable the alarm
function.
When the alarm is enabled, the icon will appear on the display.
USING THE ALARM AND SNOOZE FUNCTIONS
• In time display mode, press the
ALARM SET
button to enter
alarm time mode. Press the
ALARM SET
button again to turn
on or turn off the alarm.
• When the alarm is turned on, the icon will appear on the
display and the alarm will beep at the set time.
• To stop the alarm:
a) Press the
SNOOZE
button. The alarm will stop and enter
snooze mode. The icon will flash continuously and the
alarm will sound again after five (5) minutes.
b) Press the
ALARM
button. This will turn off the alarm
function
entirely.
• The alarm will turn off automatically after two (2) minutes if no
buttons are pressed.
VIEWING THE YEAR
In time display mode, press the YEAR button. The year will show
on the display for five (5) seconds.
TEMPERATURE AND HUMIDITY DISPLAY
• Slide the
ºC / ºF
switch to select the temperature unit
(ºC or ºF).
• Temperature display range: -40ºC to 70ºC (-40ºF to 158ºF)
• If the temperature is beyond the display range, “HI” (higher
than the display range) or “LO” (lower than the display range)
will be shown on the display.
• Humidity display range: 20% to 90% relative humidity
• If the relative humidity is beyond the display range, “HI”
(higher than the display range) or “LO” (lower than the display
range) will be shown on the display.
BATTERY REPLACEMENT
When the clock battery is low, the icon will appear on the
display. Replace the old batteries with four (4) new AA batteries.
NOTE:
Replace the batteries if the clock has not been used for a long
time.
Do not expose the batteries to sources of excessive heat such as
sunshine, fire, etc.
SPECIFICATIONS
Radio-controlled signal
WWVB
Temperature
Display range
-40ºC
to
70ºC
-40ºF
to
158ºF
Operating range
0ºC
to
45ºC
32ºF
to
113ºF
Accuracy
-5ºC
to
-0.1ºC
+/- 2ºC
0ºC
to
40ºC
+/- 1ºC
40.1ºC
to
50ºC
+/- 2ºC
-40.1ºF
to
32ºF
+/- 4ºF
32ºF
to
86ºF
+/- 2ºF
87ºF
to
122ºF
+/- 4ºF
Humidity
Display range
20%
to
90%
Accuracy
20%
to
40%
+/- 7%
41%
to
70%
+/- 5%
71%
to
90%
+/- 7%
Power
Four (4) AA 1.5V batteries (alkaline
batteries
recommended)
Dimensions
Length
430mm
Height
288mm
Depth
33mm
Marathon Watch Company Ltd.
www.MarathonWatch.com
Customer Service: 1-800-822-4329
Designed in Canada / Conçu au Canada
Made in China / Fabriqué en Chine
ENGLISH
MANUAL
1
