Marantz SR7012 Owner'S Manual Download Page 247

Page: 247 / 370

Diagnostics

Used to check the network connection.

Physical Connection

Checks the physical LAN port connection.

Error:

The LAN cable is not connected. Check

the connection.

When connected using a wireless LAN, “Connection

Wireless (Wi-Fi)” will

be displayed.

Router Access

Checks the connection from this unit to the router.

Error:

Failed to communicate with the router.

Check the router settings.

Internet Access

Checks whether this unit has access to the Internet (WAN).

Error:

Failed to connect to the Internet. Check

the Internet connection environment or

router settings.

247

Summary of Contents for SR7012


















































































































































































































































































































































































Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands

Marantz SR7012, Owner'S Manual

Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands