Marantz SR7012 Owner'S Manual Download

Page: 141 / 370

Selecting a sound mode

Press MOVIE, MUSIC or GAME to select a sound mode.

MOVIE :

Switches to the sound mode suitable for

enjoying movies and TV programs.

MUSIC :

Switches to the sound mode suitable for

enjoying music.

GAME :

Switches to the sound mode suitable for

enjoying games.

The MOVIE, MUSIC, or GAME button memorizes the last sound mode selected for

its button. Pressing MOVIE, MUSIC, or GAME recalls the same sound mode as

the one selected at the previous playback.

If the content played back does not support the previously selected sound mode,

the most appropriate sound mode for the content is automatically selected.

This can also be set by pressing MOVIE, MUSIC or GAME on the main unit.

Switching the sound mode

Press MOVIE, MUSIC or GAME to display a list of the sound modes

that can be selected. Each time you press MOVIE, MUSIC or GAME,

the sound mode changes.

While the list is displayed, you can also use

to select a sound

mode.

Try out various sound modes and enjoy sound mode in your favorite

mode.

Example

When MOVIE is pressed

MOVIE SOUND

Stereo

DTS Neural:X

Auro-3D

Auro-2D Surround

Multi Ch Stereo

Dolby Surround

141

Summary of Contents for SR7012


















































































































































































































































































































































































Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands

Marantz SR7012, Owner'S Manual

Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands