4. Protection Pass Mode
4.1. Actions
• This mode allows the power to be turned on without activating protections.
• This mode functions in the same way as normal power-on, except that protections are not activated.
4.2. Operations
2. While holding down buttons "
M-DAX
", "
DYNAMIC EQ
" and "
DYNAMIC VOL
" simultaneously, press the power but-
ton to turn on the power.
The device returns to the normal display message after the following is displayed.
FLD
L1
P r o t e c t i o n
P a s s
This is displayed for 5 seconds before returning to the normal display.
5. CY920 Reboot Mode
5.1. Actions
• The CY920 is restarted after CY920 hang up.
• The CY920 can be restarted even in the network standby setting.
("
Setup menu
" – "
Network
" – "
IP Control
" – "
Always On
")
5.2. Operations
(1) Turn the "
Online Music
" button on and set the input source to NETWORK.
(2) While the power is on, hold down buttons "
M-DAX
" and "
DYNAMIC EQ
" for at least 3 seconds.
Display during CY920 reboot
FLD
L1
N e t w o r k
R e s t a r t
(4) Returns to the normal display.
NOTE :
• After rebooting CY920, the same operation is not accepted for 1 minute.
• Reception is prohibited during update, save and load.
74
