manualshive.com logo in svg

Marantz SR6011, Owner'S Manual

Share
Download
Marantz SR6011 Owner'S Manual Download Page 264

o

The menu screen is not displayed on the TV

Symptom

Cause / Solution

Page

The menu screen or status

information screen is not

displayed on the TV.

0

The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is

connected to a TV using a different video output connector, operate while watching the display on this

unit.

－

0

The status information will not appear on the TV when the following video signals are being played.

- Some images of 3D video content

- Computer resolution images (example: VGA)

- Video with an aspect ratio other than 16:9 or 4:3

249

0

When a 2D video is converted to a 3D video on the TV, the menu screen or status information screen is

not displayed properly.

249

0

In the pure direct playback mode, the menu screen or status information is not displayed. Switch to a

sound mode other than the pure direct mode.

139

0

Set the “TV Format” setting in the menu to a selection that is appropriate for the TV.

198

Contents

Connections

Playback

Settings

Tips

Appendix

264

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for SR6011

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands