manualshive.com logo in svg

Marantz SR6011, Owner'S Manual, Page: 231 / 344

Share
Download
Marantz SR6011 Owner'S Manual Download Page 231

o

Connect Using

Select the method for connecting to the home network (LAN).

Wired (Ethernet):

Use a LAN cable to connect to a network.

Wireless (Wi-Fi)

(Default)

:

Use the wireless LAN (Wi-Fi) function to

connect to a network.

0

This can be set when “Wi-Fi” is set to “Enabled”. (

v

 p. 230)

Wi-Fi Setup

Connect to a wireless LAN (Wi-Fi) router.

The router can be connected in the following ways. Select the connection

method to suit your home environment.

o

Scan Networks

Select the network you wish to connect to from the list of possible

networks shown on the TV screen.

1.

Select the network you wish to connect to from the list of wireless

networks.
Select “Rescan” if the network cannot be found.

2.

Enter your password and select “OK”.

o

Use iOS Device

Use your iOS device (iPhone/iPod/iPad) to connect to the network. By

connecting your iOS device to this unit, the unit can be automatically

connected to the same network as your device.
This unit can be connected to your iOS device in two ways, using a

USB cable and using Wi-Fi.

Contents

Connections

Playback

Settings

Tips

Appendix

231

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for SR6011

























































































































































































































































































































































Reviews:

No comments