Marantz SR6011, Owner'S Manual

Page: 262 / 344

o
No video is shown on the TV
Symptom Cause / Solution Page
No picture appears.
0
Check the connections for all devices. 63
0
Insert connection cables all the way in.
－
0
Check that input connectors and output connectors are not reversely connected.
－
0
Check cables for damage.
－
0
Match the input settings to the input connector of the TV connected to this unit. 199
0
Check that the proper input source is selected. 82
0
Check the video input connector setting. 199
0
Check that the resolution of the player corresponds to that of the TV. 249
0
Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not
compatible with HDCP, video will not be output correctly.
276
0
To enjoy content that is copyright protected by HDCP 2.2, use a playback device and TV compatible with
HDCP 2.2 only.
－
0
The HDMI signal cannot be converted to an analog signal. Use analog connections. 277
0
To play back a 4K (60/50Hz) video, use a “High Speed HDMI Cable” or an “High Speed HDMI Cable with
Ethernet”. In order to achieve a higher fidelity for 4K (60/50Hz) videos, it is recommended to use a
“Premium High Speed HDMI Cables” or an “Premium High Speed HDMI Cables with Ethernet” that has
an HDMI Premium Certified Cable label on the product package.
－
No video is shown on the
TV with the DVI-D
connection.
0
With the DVI-D connection, on some device combinations, devices may not function properly due to the
copy guard copyright protection (HDCP).
276
No video from an input
source such as a game
console is shown on the
TV.
0
When special video signals are input from a game console, etc., the video conversion function may not
function. Connect the input connector to the monitor output connector of the same type.
－
Contents Connections Playback Settings Tips Appendix
262
Front panel Display Rear panel Remote Index