TECHNICAL SPECIFICATIONS
n
Audio section
• Power amplifier
Rated output
:
Front :
110W+110W(8Ω, 20Hz
-
20kHz with 0.08% T.H.D.)
150W+150W(6Ω, 1kHz with 0.7% T.H.D)
Center :
110W(8Ω, 20Hz - 20kHz with 0.08% T.H.D.)
150W(6Ω, 1 kHz with 0.7 % T.H.D.)
Surround :
110W+110W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.)
150W+150W(6Ω, 1 kHz with 0.7 % T.H.D.)
Surround back:
110W+110W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.)
150W+150W(6Ω, 1 kHz with 0.7 % T.H.D.)
Output connectors : 4 - 16Ω
n
Analog section
Input sensitivity/Input impedance :
200 mV/47 kΩ
Frequency response :
10 Hz - 100 kHz — +1, -3 dB(Direct mode)
S/N :
100 dB(IHF-A weighted, Direct mode)
Distortion :
0.005 % (20 Hz – 20 kHz) (Direct mode)
Rated output :
1.2 V
n
Digital section
D/A output :
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input :
Format — Digital audio interface
n
Phono equalizer
Input sensitivity :
2.5 mV
RIAA deviation :
±1 dB (20 Hz to 20 kHz)
S/N :
74 dB (IHF-A)
Distortion factor :
0.03 % (1 kHz, 3 V)
n
Video section
• Standard video connectors
Input/output level and impedance :
1 Vp-p, 75 Ω
Frequency response :
5 Hz - 10 MHz — 0, -3 dB
• Color component video connector
Input/output level and impedance :
Y signal — 1 Vp-p, 75 Ω
PB / CB signal — 0.7 Vp-p, 75 Ω
PR / CR signal — 0.7 Vp-p, 75 Ω
Frequency response :
5 Hz - 60 MHz — 0, -3 dB
n
Tuner section
Reception frequency range : FM
87.5 MHz - 107.9 MHz(for E3)
FM
87.5 MHz - 108.0 MHz(for E2, E1C)
AM
520 kHz - 1710 kHz(for E3)
AM
522 kHz - 1611 kHz(for E2, E1C)
Effective sensitivity :
FM
1.2μV
(
12.8dBf)
AM
18 μV
50 dB sensitivity :
MONO ― 2.8 μV (20.2 dBf)
S/N:
MONO ― 70 dB (IHF-A weighted, Direct mode)
STEREO ― 67 dB (IHF-A weighted, Direct mode)
Distortion :
MONO ― 0.7 % (1 kHz)
SRETEO ― 1.0 % (1 kHz)
n
Wireless LAN section
Network type
(wireless LAN standard):
Conforming to Wi-Fi®
z
1
Security :
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency :
2.4 GHz
No. of channels :
1 - 11 ch (for E3)
1 - 13 ch (for E2, E1C)
z
1
The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product
Logo are registered trademarks of the Wi-Fi Alliance.
n
Bluetooth section
Communications system :
Bluetooth Version 2.1 + EDR
(Enhanced Data Rate)
Transmission power :
Maximum 2.5 mW (Class 2)
Maximum communication range :
Approx. 32.8 ft/10 m in line of sight
Frequency band :
2.4 GHz band
Modulation scheme :
FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles :
A2DP 1.2 (Advanced Audio Distribution Profile)
AVRCP 1.4 (Audio Video Remote Control Profile)
Corresponding codec :
SBC, AAC
Transmission range (A2DP) :
20 Hz - 20,000 Hz
n
General
Power supply :
(for E3) :
AC 120 V, 60 Hz
(for E2) :
AC 230 V, 50 Hz / 60Hz
(for E1C) :
AC 220 V, 50 Hz
Power consumption :
650W
Power consumption in standby mode :
0.2W
Power consumption in CEC standby mode :
0.5W
Power consumption in network standby mode :
2.7W
For purposes of improvement, specifications and design are subject to
change without notice.
DIMENSION
Unit： in. (mm) Weight： 25 lb 2 oz (11.4 kg)
45/64 (18)
35/64 (14)
45/64 (18)
1 17/64
(32)
2 3/32
(53)
9 49/64 (248)
15 9/32 (388)
1 27/32
(47)
55/64 (22)
9 1/64
(229)
6 11/32
(161)
5 25/32
(147)
13 45/64
(348)
15 43/64
(398)
1 31/32(50)
13 25/64 (340)
17 21/64 (440)
1 31/32 (50)
2 11/64
(55)
9
