Marantz SR6009/K1B, Service Manual

Page: 19 / 214

SPECIAL MODE
Special Mode Configuration Buttons
b
No. 1 - 12 : Hold down buttons A, B and C at the same time and press the power button to turn on the power.
b
No. 13 ： Press the A and B buttons simultaneously while inserting the AC plug to turn the power on.
No. Mode Button A Button B Button C Contents
1 Version Display
(u-COM / DSP Error Display)
DIMMER STATUS -
Displays the version of firmware such as the main firm-
ware or DSP, etc. Errors that have occurred are displayed.
(See 20 page )
2 Protection History Display Mode
ZONE2
SOURCE
STATUS -
Displays the protection occurrence history.
(See 59 page )
3 Check the Video/Audio pass
Mode
↑ ↑ ↑
This is a special mode for service confirmation used dur-
ing repair work to simplify the confirmation work for the
Audio channel/video channel.
(See 27 page )
4 TUNER step ↑ ↑ ↑
Enables reception STEP of the ANALOG TUNER to be
changed.
(See 62 page )
5 Operation INFO ↑ ↑ ↑
Displays the total operating time of the set, number of
times the power was switched on, and number of occur-
rences of each protection.
(See 61 page )
6
User Initialization mode
(Settings for the Installer Setup are
not initialized.)
M-DAX
ZONE2
SOURCE
-
Initializes backup data.
(Settings for the Installer Setup are not initialized.)
7
Factory Initialization mode
(Initialization includes settings for the
Installer Setup.)
TUNER
PRESET
CH -
TUNER
PRESET
CH +
-
Initializes backup data.
(Initialization includes settings for the Installer Setup.)
8 Mode for preventing remote
control acceptance
M-DAX DIMMER -
Start this unit in the PANEL/REMOTE LOCK selection mode
so that PANEL LOCK and Remote Lock can be selected as
ON or OFF. (See 23 page )
9 PANEL LOCK mode
(with Volume)
↑ ↑ -
This function prevents reception of all keys/encoders
(including VOLUME) other than the power supply button
on the Front Panel.
10 PANEL LOCK mode
(without Volume)
↑ ↑ -
This function prevents reception of all keys/encoders
other than the power supply button and VOLUME encoder
on the Front Panel.
11 Panel Lock Release ↑ ↑ - Function for Releasing the PANEL LOCK
12 Protection pass mode DIMMER STATUS
SOUND
MODE
Enables the power to be turned on when protection de-
tection is in the stopped state.
(See 63 page )
13 Forced USB All Device Write Mode
TUNER
PRESET
CH +
STATUS -
Mode used when this unit cannot be recovered.
Forcibly switches this unit to USB update mode.
(See 71 page )
TUNER
PRESET CH +
STATUS ZONE2
SOURCE
M-DAX
X
TUNER
PRESET CH -
DIMMER SOUND
MODE
19