Audio
Make audio-related settings.
Filter
This unit is equipped with a sound quality adjusting function which allows
users to enjoy the desired playback sound quality. The unit supports PCM
signal.
Filter 1
(Default):
Very short but symmetrical impulse
response. Very precise soundstage and
smooth tonal balance.
Filter 2:
Very short pre-ringing - long post-ringing.
Neutral tonal balance - slightly brighter than
“Filter 1”.
Variable Out
You can stop the circuit that outputs audio from the analog audio output
terminals (VARIABLE) of this unit. This prevents the audio signal output
from the analog audio output terminals (FIXED) from being affected. If you
will not use the analog audio output terminals (VARIABLE), turning this
setting off enables a higher quality of sound.
On
(Default):
Enables variable audio output.
Off:
Disables variable audio output.
Volume Limit
Make a setting for the maximum volume of the audio signal output from the
analog audio output terminals (VARIABLE).
Off
(Default):
Do not set a maximum volume. (100
(+6dB))
95 (+1dB)
/
90 (-4dB)
/
85 (-9dB)
/
80 (-14dB)
87
