Operations cannot be performed through the remote control unit
Operations cannot be performed through the remote control unit.
0
Batteries are worn out. Replace with new batteries. (
0
0
Remove any obstacle between this unit and the remote control unit.
0
Insert the batteries in the proper direction, checking the
q
and
w
0
The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the
remote control sensor will not be exposed to strong light.
0
When using a 3D video device, the remote control unit of this unit may not function due to effects of infrared communications between units (such as TV
and glasses for 3D viewing). In this case, adjust the direction of units with the 3D communications function and their distance to ensure they do not
affect operations from the remote control unit of this unit.
0
The remote control code of the volume buttons on the remote control (VOLUME
df
and MUTE
:
) is set to the mode for operating a Marantz Network
CD player. If the volume of this unit cannot be adjusted using the remote control, press and hold ENTER and the number 2 button together for 5
seconds or more to change the remote control code to AMP operation mode.
37
