Marantz PM6007, Owner'S Manual

Page: 37 / 49

Tips
I want to play TV audio at higher quality
0
Connect the digital audio output connector of the TV to the digital audio input connector (COAXIAL, OPTICAL 1 or OPTICAL 2) of this unit, and switch
the input source to the connected (COAXIAL, OPTICAL 1 or OPTICAL 2) connector. ( v p. 22)
0
Only 2-channel linear PCM can be input as the digital audio signal to this unit.
I want to adjust the tone myself
0
Use the BASS, TREBLE and BALANCE knobs to adjust the sound as desired. (
v
p. 28)
I want sound playback that is faithful to the original sound
0
Set the source direct mode on. (
v
p. 28)
I want to switch the filter to change the desired sound quality
0
Switch the filter characteristics. (
v
p. 29)
I want to use bi-wiring compatible speakers
0
This unit is compatible with bi-wiring connections. Enjoy high quality playback by using bi-wiring connections. (
v
p. 18)
I want to operate a Marantz CD player or network audio player using the remote control of this unit
0
Switch the remote control operating mode. (“CD player operations” (
v
p. 11), “Network audio player operations” (
v
p. 13)) Also refer to the CD
player or network audio player instruction manuals.
I want to use more than one unit in one location
0
Set individual remote control codes for each combination of devices and remote control. (
v
p. 35)
Contents Connections Playback Settings Tips Appendix
37
Front panel Rear panel
Remote control
unit
Index