o
Specifications of supported audio formats
0
The FILTER 1
･
2 indicator lights only when the input source is “COAXIAL”,
“OPTICAL 1” or “OPTICAL 2”.
0
If the sampling frequency switches, the sound may be cut for 1–2 seconds.
NOTE
0
Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes
noise and could damage the speakers.
Recording
Audio signals input into this unit can be output to an external recording
device. When recording audio from a playback device connected to this
unit, audio can be recorded with the playback device still connected to this
unit.
1
Press
X
on the main unit to turn the power on.
2
Press the input source select button to switch to the
input source from which you want to record.
The indicator of the selected input source lights in blue.
3
Recording starts.
0
For information on operations, see the owner’s manual of the
recording device.
30
