Marantz NR1605/FB, Service Manual

Page: 82 / 190

YES
YES
YES
NO
NO
NO
NO
NO
NO
YES
YES
No picture or sound is output.
Check the Blu-ray/DVD player.
Check the connection of the HDMI/DVI cable.
(1) Is the HDMI/DVI cable correctly inserted?
(3) Is a certified HDMI cable (with the HDMI mark) being used?
(4) Is the HDMI/DVI cable shorter than 5m?
(5) Are a picture and sound output when a different HDMI/DVI cable is
used?
(2) Is an HDMI/DVI selector, repeater or image quality improvement
device being used?
(6) Are the HDMI output settings of the Blu-ray/DVD player correct?
(8) Are a picture and sound output
when the resolution of the Blu-
ray/DVD player is changed?
(10) Are a picture and sound
output when a different Blu-
ray/DVD player is used?
(7) If using a marantz Blu-ray/DVD player, is the "HDMI" indicator of
the fluorescent display lit?
Proceed to YES if using a Blu-ray/DVD player from another compa -
ny.
(9) Is sound output from the speaker terminal of this unit when the
power of the TV is turned off or the cable connecting the TV to this
unit is removed?
Check the connection of the HDMI/DVI cable.
Use a certified HDMI cable (with the HDMI mark).
Replace the HDMI/DVI cable with one shorter than 5m
(2m is recommended) and check again.
The HDMI/DVI cable is faulty.
Remove all of these and connect only the HDMI/DVI
cable.
Check the instruction manual of the Blu-ray/DVD player
and set the HDMI output correctly.
Set the output resolution of the Blu-ray/DVD player to a
resolution supported by the TV.
The Blu-ray/DVD player is faulty.
The Blu-ray/DVD player may not support the HDCP
repeater function.
Check with the manufacturer of the Blu-ray/DVD player.
NO
NO
NO
YES
NO
YES
YES
YES
YES
3. HDMI/DVI
3.1. No picture or sound is output (HDMI to HDMI)
82