BEFORE USE
Be sure to turn off your Amplifier before connecting or
disconnecting speakers.
Do not operate the speaker with power exceeding
limitation, or it may damage the speaker.
CAUTION WHEN INSTALLING
Do not place the Speakers near heat source, such as
radiator, or under direct sunlight.
Do not install the speakers on or at unstable location
since it is rather heavy.
This speaker is magnetically shielded, so the speaker can
be placed close to a TV but it may cause color splotch on
the picture depending on type of TV or setting location.
If color splotch occurs;
1: Turn off the TV and turn it on again 15–30 min.
later.
2: Or keep more distance between speakers and TV.
Be aware if some magnets or magnetic materials are
placed near, mutual effect with the speaker can cause
color splotch on the picture.
Speaker System
MKS1000/MKS800
In order to take maximum performance of the sound that MKS1000/MKS800 has offer, and to a satisfactory
level with safety, please read through this Instruction Manual before set up and operation.
CONNECTIONS
Align the (+) and (-) polarities for Left ( L ) and Right
( R ) and connect the speaker terminals on the amplifier
properly.
+ terminal : RED
– terminal : BLACK
+ terminal : BLUE
– terminal : BLACK
�
�
AMPLIFIER
Right Left
Connect with speaker cable
Strip cable skin
Twist axial wire
Speaker
cable
Turn counter-
clockwise to loosen
Insert axial
wore
Turn clockwise to
tighten
Connect with Y lug
Y lug
Turn counter-
clockwise to loosen
Insert Y lug
Turn clockwise to
tighten
Connect with Banana plug
Remove the speaker
terminal lid
Insert banana plug
