5
NOTE
•
When making connections, also refer to the owner’s manual of the
other components.
•
Do not bundle power supply cords together with connection cables.
Doing so can result in hum or noise.
Connecting the power cord
NETLINK
WPS
NETWORK
L
R
LINE IN
WIRELESS LAN
ON/STANDBY
Power cord
(Supplied)
To household power outlet
(AC 120 V, 60 Hz)
NOTE
•
Only use the supplied power cord.
•
Be sure the power cord is unplugged from the power outlet before
connecting or disconnecting it to the AC inlet.
Connections
Connecting a USB memory device
•
You can enjoy music stored on a USB memory device.
•
For operating instructions see “Playing a USB memory device”
(
NETLINK
WPS
NETWORK
L
R
LINE IN
WIRELESS LAN
ON/STANDBY
USB
memory
device
•
If the USB memory device is divided into multiple partitions, only the
top partition can be selected.
•
This unit is compatible with MP3 files conforming to “MPEG-1 Audio
Layer-3” standards.
•
Marantz does not guarantee that all USB memory devices will
operate or receive power. When using a portable USB hard disk drive
(HDD) which came with an AC adapter, use that device’s supplied
AC adapter.
NOTE
•
Note that Marantz will accept no responsibility whatsoever for any
problems arising with the data on a USB memory device when using
this unit in conjunction with the USB memory device.
•
USB memory devices will not work via a USB hub.
•
It is not possible to use this unit by connecting the unit’s USB port
to a PC via a USB cable.
•
Do not use an extension cable when connecting a USB memory
device. This may cause radio interference with other devices.
Connecting a portable player
•
If a portable player is connected via the LINE IN jack of the unit,
music from the portable player can be played.
•
For operating instructions see “Playing a portable player”
(
Cables used for connections
Audio cable (sold separately)
Stereo mini-
RCA cable
R
L
NETLINK
WPS
NETWORK
L
R
LINE IN
WIRELESS LAN
ON/STANDBY
HEADPHONE
R
L
Portable
Audio
Pr
epar
ation
Oper
ation
Inf
or
mation
Pr
epar
ation
