Marantz AV7701, Service Manual

Page: 11 / 266

11
DISASSEMBLY
• Disassemble in order of the arrow in the following figure.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the reassembling, observe "Caution concerning disassembly and assembly!".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
FRONT PANEL ASSY
Refer to
"DISASSEMBLY
1. FRONT PANEL ASSY"
and "EXPLODED VIEW"
PCB FRONT
(Ref. No. of EXPLODED VIEW : C1)
PCB HP
(Ref. No. of EXPLODED VIEW : C2)
PCB FRONT HDMI
(Ref. No. of EXPLODED VIEW : C19)
PCB DOOR DET
(Ref. No. of EXPLODED VIEW : C3)
PCB FRONT HDMI FFC CABLE
(Ref. No. of EXPLODED VIEW : C5)
TRANS MAIN
Refer to "DISASSEMBLY
5. TRANS MAIN"
and "EXPLODED VIEW"
TRANS , POWER
(Ref. No. of EXPLODED VIEW : C20)
HEAT SINK ASSY
Refer to
"DISASSEMBLY
2. HEAT SINK ASSY"
and "EXPLODED VIEW"
PCB H-DAM
(Ref. No. of EXPLODED VIEW : C8)
PCB GUIDE L
(Ref. No. of EXPLODED VIEW : C23)
GUIDE_FRONT FFC
(Ref. No. of EXPLODED VIEW : C4)
CABINET TOP
HDMI UNIT ASSY
Refer to "DISASSEMBLY
3. HDMI UNIT ASSY"
and "EXPLODED VIEW"
PCB HDMI
(Ref. No. of EXPLODED VIEW : C15)
PCB FRONT HDMI FFC
(Ref. No. of EXPLODED VIEW : C7)
PCB VIDEO
(Ref. No. of EXPLODED VIEW : C14)
PCB FUSE
(Ref. No. of EXPLODED VIEW : C11)
PCB F/W PRE OUT
(Ref. No. of EXPLODED VIEW : C9)
PCB INPUT
(Ref. No. of EXPLODED VIEW : C13)
PCB XLR
(Ref. No. of EXPLODED VIEW : C10)
PCB SIDE CNT
(Ref. No. of EXPLODED VIEW : C16)
PREOUT PCB
(Ref. No. of EXPLODED VIEW : C12)