Maquet HCU 40, Instructions For Use Manual

Page: 82 / 148

| 82 | 6 Messages | HCU 40 |
Instructions for Use | 1.0 | EN | 01
Copyright Maquet Cardiopulmonary GmbH
6.3 Physiological Alarms
6.3.1 Medium Priority
Message Possible conse­
quences Possible cause Possible action
Pat.: Ext. temp. above
max. limit External temperature
above warning limit Check connection of
temperature sensors.
Check setpoint and ac­
tual temperature.
Check the patient pa­
rameters.
Pat.: Ext. temp. below
min. limit External temperature
below warning limit Check connection of
temperature sensors.
Check setpoint and ac­
tual temperature.
Check the patient pa­
rameters.
Cplg.: Ext. temp. above
max. limit External temperature
above warning limit Check connection of
temperature sensors.
Check setpoint and ac­
tual temperature.
Check the patient pa­
rameters.
Cplg.: Ext. temp. below
min. limit External temperature
below warning limit Check connection of
temperature sensors.
Check setpoint and ac­
tual temperature.
Check the patient pa­
rameters.
6.4 Technical Alarms
WARNING!
n
If the "Water pressure too high" alarm is emitted, check whether the outlet
valve is closed or if a tube is kinked.
WARNING!
Operating the pump with an empty tank can damage the device!
If the tank is empty, the pump can run dry and be damaged.