Maquet HCU 40, Instructions For Use Manual

Page: 26 / 148

| 26 | 3 System Description | HCU 40 |
Instructions for Use | 1.0 | EN | 01
Copyright Maquet Cardiopulmonary GmbH
3.6.2 Toolbar
The touchscreen displays the toolbar on the right. This allows you to navigate
between different screens, call up functions, as well as activate and deactivate
settings.
Symbol Meaning
"Main screen"
Switch to the main screen ( ⇨ "Main Screen", page 28).
"Functions"
Switch to the "Functions" screen ( ⇨ "Functions", page 29
).
"Settings"
Switch to the "Settings" screen ( ⇨ "Settings", page 32).
"Current alarm pause"
Pausing the current alarm ( ⇨ "Pausing the Current Alarm",
page 34).
3.6.3 "Warming" and "Cooling" Hotkeys
The hotkeys are only visible in the main screen.
You can use the hotkeys to call up stored values for setpoint temperatures and
setpoint gradients directly instead of having to enter or change them individually.
The use of hotkeys thus allows considerable time savings for frequently selected
temperatures. The values can be set in the hotkey settings in advance (⇨ "
Changing the Hotkey Settings", page 59).
You can use two separate hotkeys for cooling and warming. You can set the
values for the patient circuit and cardioplegia water circuit independently of each
other for each hotkey.
Symbol
Hotkey [Warm patient water circuit]
Hotkey [Warm cardioplegia water circuit]
Hotkey [Cool patient water circuit]
Hotkey [Cool cardioplegia water circuit]