1133.12B1/B3/F1/F3
GA113312EN02
27
3.4 Table top padding
The operating table top is supplied with table top plates
and SFC pads secured with Velcro straps.
3.5 Accessories
Mount only the accessories listed in chapter VIII.
Do not use non-original accessories which affect the
longitudinal geometry of the table top without first con-
sulting with MAQUET.
Accessories which are mounted on the side rails of the
operating table provided for this purpose should also be
drawn exclusively from the MAQUET line of accesso-
ries. When developing MAQUET accessories, close
attention is paid to careful harmonization with the
MAQUET operating tables. This means that when the
accessory is used for its intended purpose, the maxi-
mum possible safety for patients and staff will be at-
tained.
Accessories (to be mounted on the side rails) which
are made by other manufacturers must be particularly
carefully examined to ensure that they do not represent
a hazard to the patient and the staff or to the operating
table (due to possible collisions). Particularly acces-
sory units with high weights or long lever arms (such as
hand operating tables, retractor systems etc.) must be
expressly permitted by MAQUET.
Injury hazard!
Do not use worn or damaged accessories!
Injury hazard!
Make sure to fasten the table top accessories
properly!
Injury hazard!
Collisions between accessories, the operating
table and the patient can occur when adjusting
or displacing the operating table.
Observe the adjustment procedure and avoid col-
lisions.
III. General description