1133.12B1/B3/F1/F3
GA113312EN02
13
M)
DOWN
Slope leg plate downward
N)
LOCK
Operating table immobilized
O)
UNLOCK
Operating table on its castors, can be dis-
placed
2.3 IR remote control (optional)
The operating table can be equipped with an IR remote
control, as desired.
The required charging station for the IR remote control
is not included with the order no. 1133.91A0.
The layout of the function buttons for the operating ta-
ble adjustments is the same on the corded hand con-
trol and the IR remote control apart from one exception:
There are no function buttons for the autodrive in the
base. For safety reasons, you can only activate this
function via the corded hand control.
Note:
When switching on the IR remote control, the LED
status indicators on the control panel on the oper-
ating table column are active (see chapter „Override
system“).
Note:
When using the IR remote control or the corded
hand control, the electronics generally avoid colli-
sions with the floor or parts of the operating table.
If accessories with manual adjustment functions are
mounted, then it is not always possible to avoid
collisions.
a
c
e
g
j
l
p
r
b
d
f
h
k
m
q
s
z
t
u
v
w
III. General description
Fig.III-6:
IR remote control