To maximize the window, the OIT operator presses the icon. The popup window reappears in the last position that
it was moved to.
Re turning to a pre vi ous win dow
You can configure a function key to display the full-sized base window that was on the OIT screen before the
currently shown window. Perform the following:
4
Create a function key to return to previous window
1.
From the
Parts
menu, select
Function Key
. The Create Function Key Object dialog box is
displayed.
2.
Click Return to Previous.
3.
Configure the rest of the function key, and then click
OK
.
4.
Place the function key object onto the full-sized base screen.
Placing a ‘return to previous’ function key onto a popup window will not work.
Using a func tion key to close a win dow
You can configure a function key to close any popup window that is currently displayed on the OIT screen:
4
Create a function key to close a window
1.
From the
Parts
menu, select
Function Key
. The Create Function Key Object dialog box is
displayed.
2.
Click Close Window.
3.
Configure the rest of the function key, and then click
OK
.
4.
Place the function key object onto the popup window.
Placing a ‘close window’ function key onto a full-size base screen will not work.
Us ing the Com mon Win dow
Your project might require that some data be displayed on the OIT screen at all times, regardless of which
window(s) are displayed. For example, you may want to display a company logo on the OIT screen at all times, or
you may want to display some critical data or an alarm message which should be seen no matter what windows are
displayed.
Using base windows to display this information requires that you configure every full screen base window with the
same graphics object. The common window however, is a predefined window in the OIT that you can enable to
display this information. When created, the common window always operates in the background as a full screen
window that overlays any full screen base window displayed.
Whenever you create a new project, the common window (Window #6) is automatically created.
1010-1001a, Rev 02
Cre ating Win dows
101
Summary of Contents for Silver HMI504T
