OMI Operations Manual: OMI6800 Series
31
OMI Operations Manual: OMI6800 Series
31
SD CARD INSTALLATION
1. Using a #1 Phillips screwdriver, remove
the 2 Phillips screws indicated in the
figure.
2. Remove the storage cover by lifting it
out of the unit.
3. Using a #1 Phillips screwdriver, remove
the 1 screw retaining the storage
bracket. Then carefully slide the bracket
out of the unit.
4. Install the SD card in the SD card slot
located under the SSD.
5. Slide the bracket and storage device
into the OMI, securing it with the screw
removed in step 3.
6. Then replace the storage cover and
secure it with the screws removed in
step 1.