Kurzanleitung / Short manual
Dehnspannfutter HydroChuck / Hydraulic chuck HydroChuck
23
3
General information
3.1
Tools and materials required
Hex-wrench to set the radial tool length setting screw - Wrench size 2
Hex-wrench to set the clamping screw - Wrench size 5
3.2
Technical data
Warning
Failure to comply with the technical data in section 3.2
may result in injuries ranging from slight to serious.
Ensure the technical data in section 3.2 are not exceeded.
Summary of Contents for HydroChuck
Page 35: ......
