F5 3D Imaging System User Manual
96
Figure 91: Point-to-plane Measurement
6
Press Enter. The Plane-to-point measurement is defined. The measurement is
entered into the History pane and the subparts are entered into the Primitives
pane.
Measuring the Distance between Two Points
►
To measure the distance between two points:
1
Select the
icon on the Measurement toolbar.
2
Double-click a point in the scene (measurement’s start point).
– OR –
Instead of defining a new point, select a previously defined point in the
Primitives pane by double-clicking the point in the Primitives pane.
3
Double-click a different point in the scene (measurement’s end point).
– OR –
Instead of defining a new point, select a previously defined point in the
Primitives pane by double-clicking the point in the Primitives pane.
The distance appears in the Viewing Area and Information pane in the
selected measurement unit.
NOTE
Double-click repeatedly until the required points are selected.
