F5 3D Imaging System User Manual
91
– OR –
Instead of defining a new point, select a previously defined point in the
Primitives pane.
4
Double-click a different point in the scene (the measurement’s end point) to
display the line.
– OR –
Instead of defining a new point, select a previously defined point in the
Primitives pane.
NOTE
Double-click repeatedly until the required points are selected.
5
Press Enter. The line is defined and entered into the Primitives pane.
Figure 86: Defining a Snap Line
Defining a Snap Line Perpendicular to Two
Planes
This option defines a snap line that intersects between two planes.
Using Points to Create the Planes
