F5 3D Imaging System User Manual
41
►
To play a frame-by-frame 3D recorded video:
This option enables you to display the progress of the creation of the point cloud
while it was being recorded.
1
Double-click an MPC file in the File Explorer. Any file in which MPC is part of
the file extension can be played.
2
Click the Display as Film button in the bottom right of the window
.
3
Click the Play
button to play the recorded video showing the scenes as
they were scanned.
NOTE
You can click the Display as Model button at the bottom right of the window to
return to viewing the 3D model.
KaplaVision Player View Toolbar
The following toolbar is displayed in Player View (which is described on page 38).
To display the toolbar, double-click output0.mis or output1.mis.
Figure 17: KaplaVision 2D Live View Toolbar
Convert to AVI
: Converts the video recorded in the selected infrared
image file (Output0.mis) and its associated color image file (Output1.mis) into
AVI video format. Simply select either the Output0.mis or the Output1.mis file
and then click this button.
Decode
: Processes an infrared image file (Output0.mis) and its
associated color image file (Output1.mis) in order to create a point cloud
(MPC file format).
NOTE
Decoding can be done without the color image (Output1.mis) if it does not
exist. It then produces a point cloud without color.
Run Live 3D View Button
: Click this button to display what is
currently seen by the F5-B Imager (Live). In this mode, you can start
recording.
