F5 3D Imaging System User Manual
18
Workflow – Using the F5-B 3D Imaging System
The following diagram shows an overview of how to use the F5 3D Imaging
System followed by a short description of each step and a reference to where this
procedure is described in detail:
Step 1
Connecting Scanning Equipment
Step 2
Scanning
Step 3
reviewing the scan in KaplaVision
Step 4
Registration (Various)
Step 5
Point Cloud Processing
Step 6
Additional Options
Step 7
Exporting
Figure 7: Workflow – Using the F5-B 3D Imaging System
1.
Connecting Scanning Equipment:
Connect the handheld Imager to the windows based Workstation on which the
KaplaVision application has been installed.
2.
Scanning:
Before you start scanning, we highly recommend that you read the Scanning
Technique Guidelines section on page 28.