GB - 10
High-Pressure Cleaner
Item-no. 22310
O P E R A T I N G I N S T R U C T I O N S
Intended Usage
The high-pressure cleaner is used to clean objects and exterior areas (tools, vehicles,
boats, patios, building exteriors, garden furniture, etc.) with a high-pressure jet of water. It
is not intended for industrial use.
It should be noted that vehicles and their engines may only be cleaned in locations with a
suitable oil trap.
Before using the high-pressure cleaner, you should read and pay
attention to the following safety instructions!
Safety instructions for the high-pressure cleaner:
The unit may only be connected to an electrical supply, which has been installed in
accordance with IEC 60364
The equipment may only be used outdoors!
This unit must be used in upright position only!
The high-pressure cleaner may not be operated by children or people who have not
been instructed on its use.
The equipment may not be operated in an environment where there is a risk of an
explosion.
Never leave the equipment unattended, while the on/off switch (10) is engaged.
The jet (23+24) of the high-pressure cleaner may not be directed at people, animals,
electrical components or at its own workings. Do not allow unauthorised personnel into
the area where you are working.
Never direct the jet (23+24) at yourself, or others, in order to clean clothes or footwear.
Objects containing dangerous substances (e.g. asbestos) may not be hosed down.
Before starting work, specifically check the integrity of the cable (8) and the high-
pressure hose (3).
A damaged trigger gun (10) must be replaced by an approved workshop.
A damaged high-pressure hose (3) must be swapped for a manufacturer’s replacement
high-pressure hose before using the equipment.
If the cable (8) is damaged, it must be replaced by a specialised connection cable,
which is available from the manufacturer or their after-sales service.
Do not touch the mains plug of the cable (8) with wet hands.
If needed, only use splash-proof extension cables and ensure that the mains plug and
socket of the extension cable are waterproof. Unsuitable extension cables can be
dangerous.
Pay attention to the impermeability of the feeder hose and its connection to the hose
coupling (9).
The feeder hose and high-pressure hose (3) should not be bent.
Only clean vehicle tyres and valves at a distance of at least 30cm and only using the
fan nozzle.
