Manitowoc GROVE GMK5150L, Operating Manual

Page: 743 / 1040

Crane operation
11.9 Heating and air-conditioning system
Operating manual 3 302 709 en 11 - 153
GMK5150L
1
2
.0
1.
201
8
11.9.2
Air-conditioning system
You can use the air-conditioning system to cool and dry the air in the
crane cab.
Notes Do not cool the air in the crane cab too much.
The difference between the outside temperature and the inside temperature
should be at the most 10 °C to 14 °C (50 °F to 57.2 °F).
If the cooling is too severe, you may frequently feel physically uncomforta-
ble, albeit mostly only after you leave the cool environment.
Avoid having cold air blowing directly on to your body.
When using recirculated air, you should switch over to fresh air mode to
ensure a fresh supply of oxygen at the same time. Adjust the cooling output
to your actual needs:
If the truck crane has been exposed to strong sunlight for a long period of
time, for example, the air-conditioning system should initially be operated
at the highest blower level with the engine running.
The door or at least the windows should be left open for a short while to
thoroughly air the cab.
If the air-conditioning system is operated continuously, close the windows
and doors to ensure sufficient cooling.
Once the inside temperature has reached the desired temperature, set the
fan to a lower level.
Switching on/off
•
Start the engine. The air-conditioning operates only when the engine is
running.
Switching on
•
Select and confirm the symbol ( 1 )
– symbol is red
Switching off
•
Select and confirm the symbol ( 1 ) again –
symbol is grey
s