Manitowoc GROVE GMK5150L, Operating Manual

Page: 374 / 1040

Malfunctions in driving mode
8.3 Warning and error messages
8 - 18 3 302 709 en Operating manual
GMK5150L
1
2
.0
1.
201
8
Error message display
For each error the display shows:
– The error code ( 3 )
– The symbols for the faulty components:
•
Always note the error code before
contacting
Manitowoc Crane Care
.
Exiting the menu
You can exit the Engine errors menu at any time.
•
Press the button ( 1 ) once.
The next highest menu is opened.
If not all errors have been acknowledged then the symbol ( 1 ) will be dis-
played continuously.
When all errors are acknowledged, the symbol ( 1 ) goes out.
The buzzer tone sounds once and the symbol ( 1 ) flashes when an error
occurs.
Special error
messages The error messages listed here are shown after the removal of the outrigger
beams and cannot be acknowledged.
The error messages have no effect on driving and will no longer be shown
after the correct installation of the outrigger beams.
If other error messages are shown;
à
Display of error / total errors
, p. 14 - 8.
1 Engine
2 Transmission
5801.7.33.2 5809.7.32.96 5801.7.33.98
5803.7.32.2 5807.7.32.96 5803.7.32.98