manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Operating Manual

Share
Download
Manitowoc GROVE GMK 6400 Operating Manual Download Page 818

Rigging work
12.8 Rigging the auxiliary hoist

12 - 102

3 112 993 en

Operating manual GMK 6400

1

2

.0

7.

201

3

 12.8.9            

Locking/unlocking the auxiliary hoist

Auxiliary hoist 
safety valve

The hydraulic cylinders of the locking pins are blocked with a safety valve. 
The valve is located on the rear right-hand side of the auxiliary hoist, at the 
same height as the treadle.

 

Closing the valve

Always close the valve after you have locked 
the auxiliary hoist on the 15 t base plate.

•

Close the valve – handle (

1

) at right angles to 

the line.

The pins are secured against accidental activa-
tion.

Opening the valve

Before the locking pins are extended or 
retracted, you have to open the safety valve.

•

Open the valve – handle (

1

) parallel to the 

line.

The pins can now be moved using the hand-
held control.

•

Close the valve after extending the pins.

G

Risk of accident when the safety valve is open

Always close the safety valve when the auxiliary hoist on the 15 t base plate 
is locked. This prevents the auxiliary hoist from being unlocked due to unin-
tentional actuation and from being lifted off the base plate.

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands