manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Operating Manual

Share
Download
Manitowoc GROVE GMK 6400 Operating Manual Download Page 196

Driving
5.2 Operating the transmission

5 - 24

3 112 993 en

Operating manual GMK 6400

1

2

.0

7.

201

3

 5.2.2            

Switching the transmission to neutral position

You can switch the transmission to neutral position at any time.

•

Shift to position 

N.

The neutral position is switched on when the entry 

N

 appears.

Switch the transmission to neutral position to start the engine. The engine 
may only be started in this position. 

G

Risk of accident when switching on while driving

If you switch the transmission to neutral position while driving, the drive 
line will be interrupted. As a result you will no longer be able to accelerate 
the truck crane, when trying to avoid an obstacle for example, and the 
engine retarder will have no effect.

G

Risk of accident from rolling truck crane 

Always apply the parking brake or the service brake before you switch to 
the neutral position. This prevents the truck crane from rolling away unin-
tentionally. 

S

Risk of damage to the transmission

When stationary for a longer period (e.g. in a traffic jam or at a train cross-
ing), always switch the gear to 

N

. 

This avoids excessive wear on the gear components.

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands