manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Operating Manual

Share
Download
Manitowoc GROVE GMK 6400 Operating Manual Download Page 181

Driving

5.1 Before driving

Operating manual GMK 6400

3 112 993 en

5 - 9

1

2

.0

7.

201

3

Supply pressure

The brake system and some consumers (e.g. differential locks, driver's seat, 
etc.) require sufficient supply pressure in order function properly.

•

Check that the supply pressure is approx. 8 bar (116 psi).

If the supply pressure is too low, such as after repairs, you can build it up as 
follows. 

Building supply pressure

•

Check that the parking brake is applied.

•

Allow the engine to keep running. The supply pressure builds up and you 
can speed up this process by pressing the accelerator.

Light (

1

) turns off once the supply pressure reaches approx. 5.5 bar (80 psi). 

•

Build the supply pressure until: 

– Approx. 8 bar (116 psi) is reached,  

– A valve audibly releases pressure. 

There is now sufficient supply pressure.

s

G

Risk of accident by truck crane moving unintentionally

Make sure that the lever is pointing down before building up the supply 
pressure. 
This prevents the parking brake from releasing as soon as sufficient pres-
sure is available and the truck crane moving unintentionally.

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands